Ionic liquid and aqueous two‐phase extraction based on salting‐out coupled with high‐performance liquid chromatography for the determination of seven rare ginsenosides in Xue‐Sai‐Tong injection

A method of ionic liquid salt aqueous two‐phase extraction coupled with high‐performance liquid chromatography has been developed for the analysis of seven rare ginsenosides including Rg₆, F₄, 20(S)‐Rg₃, 20(R)‐Rg₃, Rk₃, Rk₁, and Rg₅ in Xue‐Sai‐Tong injection. The injection was mixed with ionic liquid 1‐butyl‐3‐methylimidazolium bromide aqueous solution, and a mixture was obtained. With the addition of sodium dodecyl sulfate and dipotassium phosphate into the mixture, the aqueous two‐phase mixture was formed after ultrasonic treatment and centrifuged. Rare ginsenosides were extracted into the upper phase. To obtain a high extraction factors, various influences were considered systematically, such as the volume of ionic liquid, the category and amount of salts, the amount of sodium dodecyl sulfate, the pH value of system, and the time of ultrasonic treatment. Under the optimal condition, rare ginsenosides in Xue‐Sai‐Tong injection were enriched and detected, the recoveries of seven rare ginsenosides ranged from 90.05 to 112.55%, while relative standard deviations were lower than 2.50%. The developed method was reliable, rapid and sensitive for the determination of seven rare ginsenosides in the injections.     

基于PbTiO3表面原位纳米酶的生物传感平台用于NF－κB p50检测

该文介绍了一种通过将K4Fe（CN）6配位到PbTiO3表面获得原位纳米酶的新策略。利用脱氧核糖核苷5''-单磷酸（dNMP）在PbTiO3表面的结合,阻止K4Fe（CN）6在PbTiO3表面原位形成纳米酶,构建了基于纳米酶的生物传感平台。当NF－κB p50存在时,dNMP难以产生,K4Fe（CN）6得以顺利结合到PbTiO3表面,并在其表面自发形成纳米酶,催化TMB氧化以定量检测NF－κB p50。实验表明,该方法对NF－κB p50的检测线性范围为3.0 pmol/L ~ 10 nmol/L,检出限（S/N = 3）为1.2 pmol/L,对实际样品的加标回收率为99.1% ~ 102%,相对标准偏差不大于5.3%。该方法为NF－κB p50的检测提供了一种无标记、无固定且具有信号放大作用的新策略,不仅灵敏度高、选择性好、操作简便,且在实际样品检测中具有潜在的应用价值。     

金属铁络合物光催化二氧化碳还原

二氧化碳(CO₂)光催化还原技术因兼具解决能源和全球变暖问题的潜力而受到关注。金属铁络合物作为分子型催化剂,具有价格低廉、量子效率高、结构可调控和选择性好等优势,表现出优异的CO₂光催化还原性能,成为CO₂光催化还原领域的研究热点。本文综述了近年来基于金属铁络合物光催化二氧化碳还原研究进展。介绍了铁金属络合物(如:铁卟啉、铁多吡啶、五齿铁配合物)CO₂均相光催化还原体系,总结了体系的构成以及作用机理等,着重关注了体系的催化效率和产物的选择性。此外,综述了以半导体纳米材料/量子点作为光敏剂,金属铁络合物作为催化剂的非均相催化体系的研究进展。最后,对该领域未来的研究方向和所面临的挑战做出展望。     

最密堆积中空隙分布的学习技巧

六方最密堆积和立方最密堆积是金属晶体中最常见的结构,其正四面体空隙和正八面体空隙的分布是学生学习的难点.本文将揭示密置双层-最密堆积-离子晶体结构中空隙的分布规律,进而将典型离子晶体结构与最密堆积中的空隙分布相关联.这对学生掌握空隙分布的规律性,理解金属和离子晶体结构,提升晶体结构的学习效果大有帮助.     

Implications of Nitrogen Doping on Geometrical and Electronic Structure of the Fullerene Dimers

Because of its unsaturated bonds, C₆₀ is susceptible to polymerize into dimers. The implications of nitrogen doping on the geometrical and electronic structure of C₆₀ dimers have been ambiguous for years. A quarter‐century after the discovery of azafullerene dimer (C₅₉N)₂, we reported its single crystallographic structure in 2019. Herein, the unambiguous crystal structure information of (C₅₉N)₂ is elucidated specifically, revealing that the inter‐cage C—C single bond length of (C₅₉N)₂ is comparable with that of an ordinary C(sp³)‐C(sp³) single bond, and that the most stable conformer of (C₅₉N)₂ is gauche‐conformer with a dihedral angle of 66°. To amend the structural deviations, geometrical structure of (C₅₉N)₂ is optimized by a B3LYP‐D3BJ function, which is proved to be more consistent with its single crystal structure than those by the commonly used B3LYP function. Moreover, the calculation method is also suitable for other representative fullerene dimers, such as (C₆₀)₂ and its divalent anion. Additionally, the dissociation of (C₅₉N)₂ at 473 K under mass spectrometric conditions suggests the inter‐cage C—C bond is relatively weaker than an ordinary C—C single bond, which can be explained by the interaction energies of inter‐cages.     

Visible light induced tandem reactions: An efficient one pot strategy for constructing quinazolinones using in-situ formed aldehydes under photocatalyst-free and room-temperature conditions

A facile tandem route has been developed for constructing quinazolinones from various aminobenzamides and in-situ generated aldehydes. Visible light was found to play a dual role: first oxidizes the alcohol to the aldehyde and then facilitates its cyclization with o-substituted aniline. Furthermore, alcohols are perfect alternatives to aldehydes because they are greener, more available, more economical, more stable, and less toxic than aldehydes. The first reaction step continuously provides material for the second step, which effectively reduces loss through volatilization, oxidation, and polymerization of the aldehyde, while avoiding its toxicity. A variety of quinazolinones can be prepared in the presence of visible light without any additional photocatalyst. The developed synthesis protocol proceeds with the merits of mild conditions, broad substrate scope, operational simplicity, and high atom efficiency, with an eco-energy source under metal-free, photocatalyst-free, and ambient conditions.     

ZnIn2S4/TiO2/Ag复合光催化剂的制备及分解水制氢性能

首先采用溶剂热法将1D TiO_2纳米带均匀地穿插到片层结构组装而成的3D ZnIn_2S_4微球中,所形成的异质结构能有效抑制光生电子-空穴对。其次利用光沉积法将0D Ag纳米粒子负载在3D ZnIn_2S_4/1D TiO_2异质结构上。得益于0D Ag纳米粒子的等离子体效应及电子助催化剂作用,三元3D ZnIn_2S_4/1D TiO_2/0D Ag复合光催化剂在分解水制氢方面表现出优异的性能。在模拟太阳光照射下,ZnIn_2S_4/TiO_2/Ag复合光催化剂的产氢速率达到715μmol·g~(-1)·h~(-1),相对于ZnIn_2S_4/TiO_2、ZnIn_2S_4/P25、ZnIn_2S_4、TiO_2和P25分别提高了2.7倍、3.3倍、3.8倍、184倍和518倍。同时借助于X射线衍射、扫描电子和透射电子显微镜、X射线光电子能谱和紫外可见漫反射光谱等表征手段进一步论证了复合催化剂的优异性能。     

Hydrogen Peroxide Detection Using Prussian Blue-modified 3D Pyrolytic Carbon Microelectrodes

A highly sensitive amperometric Prussian blue-based hydrogen peroxide sensor was developed using 3D pyrolytic carbon microelectrodes. A 3D printed multielectrode electrochemical cell enabled simultaneous highly reproducible Prussian blue modification on multiple carbon electrodes. The effect of oxygen plasma pre-treatment and deposition time on Prussian blue electrodeposition was studied. The amperometric response of 2D and 3D sensors to the addition of hydrogen peroxide in μM and sub-μM concentrations in phosphate buffer was investigated. A high sensitivity comparable to flow injection systems and a detection limit of 0.16 μM was demonstrated with 3D pyrolytic carbon microelectrodes at stirred batch condition